Unify - New Deployment

1. To create a new site and tank click the New Deployment button.

If your account is setup for Fuels and Lubricants and LPG, you'll see 2 options pop up. Select the option LPG if the tank has a Float Gauge, and the option Fuels and Lubricants if you're installing a pressure sensor with the monitor.

2. The first step is to create the Site the monitors will be installed on. Sites may have multiple Tanks and Devices associated with them.

2.1 Make sure to associate the Site with one of your company's subdivisions. If the subdivision does not yet exist, start typing the name and click the button to create it.

2.2 To name the Site, start typing the name of the location and the same create button will appear.

The ID section may be important for your company's ERP integration. For more information check Backend Integrations.

2.4 You can now add all other information, although it is not mandatory. Click NEXT when you're ready.

3. Setup the initial tank. The only mandatory information is identified by a star.

3.1 LOCATION and TANK THRESHOLDS tabs allow you to customize the position of your tank and/or the Alarm Thresholds to be set. Note these values will be set to default if unchanged.

Click NEXT when you're all set.

4. While you can decide to finish the setup without adding a device (it can later be added via the platform - see Associate a Device with a Tank - or on the field with Anova Go - Installation), you can type the device's serial number, making sure to select the channel the sensor is connected to and the correct sensor.

You can also set multiple communications a day (if supported by your unit).

Click FINISH to finalize the deployment process. The tank level will show when the device next communicates.